With the current drain on the economy and the housing market is ever more insistently that "with what we have," which means that instead of rebuilding, we are doing restoration work.
The question here is, it is convenient? It's the latest? What is involved in maintenance? Why do you want me to cost $ 450 to re-enamel my bath if I can buy a new one for $ 200? These are all questions that deserve the quality of response quality.
Let's start with costs. In particular, theaverage cost of installing a tank that is somewhere between $ 1400 and $ 2,500, and the factor that surround the tub. If your old tub demolish the tiles must be removed at the base of the tank. It 'possible that a "good" installer demo in a way that you are only the first row or two tiles. The reality is, if it is older than 10 years is likely to find a match for the tile that is impossible and will lead to a complete re-tile. Now you see more than $ 4,000 to$ 8000 just to replace the tub, and this convenient for you? Prepared from the moment you decide to dress up that tank make this decision.
Now, a new beautiful enamel may be better in the last 10 years, if done well, and is a process that ensures this. Production, product and technology are the key to a long finish. If this technique is not new You-enamel is followed everywhere by 1 day to 2 years. Two years may not sound like much, but if another company has to goribbons, in the end, add another $ 500 for the old re-glaze for a total of $ 950 to have it re-glazed. This is not economically advantageous. When are you going to do it, do it right the first time and there pat on the back after 5 years if your tank is still not a skin radiance. Now, for the process.
The re-glazing process six or seven steps.
Distance to seal materials. Silicon is an impurity and the result destinationFisheye. It 'important to remove all traces of this through a silicone-Cooker
Thereafter, the porcelain old to be affected by a natural yeast. This process is the surface of the preparation for the primer
If the acid etch is complete, the surface should be wiped with a degreasing solvent IT to ensure that no more pollutants left behind
Being Primer – The surface must be primed with an epoxy resinPrimer to ensure correct cross-hatching of compounds (eg, porcelain finish primer primer, clearcoat finish)
Finish – The surface is then sprayed with an acrylic urethane resin that can tint any color you want. E 'heal in two ways, the 24-hour spa and 72hr on. 72hr care is better if you do not mind waiting the extra time, but the care of 24 hours is also good.
Clearcoat – The surface is then sprayed with an acrylic urethaneClearcoat football to shine a little 'and protection from common household chemicals
If you are a new enamel finish earlier, must be the surface. If this is the case, add this step before the first.
If you follow these steps, you can be sure that your enamel is re-take many years to come. Good Refinisher be at least 10 years of guarantee "to writing," today is the cost! You'll be happy and justsaved at least 70% of the cost of replacement.
MAINTENANCE
With this procedure, you just did, maintenance a breeze. You can also use rubber mats, the number of re-Glaser is not recommended, because they know that to peel. You will be able to use Soft Scrub and a white 3M pad cleaning without damaging the surface. You'll also be able to ensure the hair has been used without the fear of staining the clear coat finish providing color. In this sense, re-glazing is notonly practical, but much more cost effective solution for the exchange.
The project will look like as complete if it was installed yesterday, you save $ 1000 to install a.
Related : Table Tennis Guitar Hero D80 Nikon
superjumpz